Grade strengths
Sharply targeted low-residue grade for PMMA
Use cases
Color change in PMMA and chase-purging after NewEX
ASACLEAN grade · specific
NewMASACLEAN purging compound
Low-residue grade for PMMA and transparent jobs
Verify resin and temperature sit inside the PMMA 180–300°C scope
180–300°COperating temperature
Definition & positioning
What jobs fits NewM
Low-residue grade for PMMA and transparent jobs. Use for color change in PMMA and chase-purging after NewEX — verify TDS limits before use
- Process
- Injection including Hot Runner; profile/sheet/blown film/compounding
- Resin
- PMMA and transparent jobs
- Temperature
- 180–300°C
- Objectives
- Color change in PMMA and chase-purging after NewEX
- Hot Runner
- Compatible; TDS sets no minimum clearance
- Glass Fiber / Additives
- No intentionally added inorganic content
- Machine Sealing
- Machine sealing compatible
- Residence / Clearance
- Max 30 min residence above 280°C
Limits before use
Verify resin and temperature sit inside the PMMA 180–300°C scope
Check on site: Temperature, resin type, Hot Runner, clearance, screen mesh and residence time
Basic operation
Basic usage
- Confirm NewM resin and temperature
- Purge old resin and set the machine per TDS, observing: max 30 min residence above 280°C
- Feed purging compound; adjust back pressure and screw speed to machine state
- Chase purging compound out with next resin; verify cleanliness before production
Injection purging procedure · Extruder guide · Back Pressure and Screw Speed
Technical documents
The TDS is the authoritative document for temperature range, process and limits
Download TDS · per supplied TDS issueSDS under review
NewM FAQ
At what temperature does NewM run
The confirmed range for NewM is 180–300°C
Can NewM run Hot Runner
Compatible; TDS sets no minimum clearance
Can NewM seal machines
Machine sealing compatible
Related technical articles
Plan a controlled trial for NewM
CSC technicians verify terms, set the baseline and define pass criteria
LINE