Pick your article
Key screw-purging and site-trouble articles. Scroll through the topics and read on at once.
Controlled high-to-low resin change
Overlapping PX2, GL3 and RU temperature ranges with residence-time limits and prep data for a Controlled Trial
Read the article
Safe changeover into POM and Nylon
Machine purge order, free shots and scrap sorting, RU, GL3 and RE selection with Hot Runner cautions before engineering-plastics production
Read the article
Injection loss-reduction guide
Beyond rejects with mass balance, loss maps, cause graphs and a black-ABS-to-white-PP case for measurable scrap plans
Read the article
What Purge and Rinse are: 2 hearts of screw purging with ASACLEAN
Purge (break-through and pull residue) and Rinse (flush and displace) with a Double-Step NewEx to SL to Virgin Resin example for high-quality transparent jobs
Read the article
Carbon (Black Specks) in injection machines: causes, mechanism and ASACLEAN fixes
Deep dive into burnt-plastic formation and part specks, and removal with Mechanical Purge built for carbon
Read the article
What Mechanical Purging is: the science behind ASACLEAN screw purging
Rheology, Shear Force and Cleaning Agent principles that purge screw barrels cleaner and faster than plain resin
Read the article
Routine Purging and Sealing: preventive-maintenance strategy cutting injection scrap
From Reactive Cleaning to Proactive Maintenance with 2 repeatable approaches keeping screws clean and ready, plus repeatable steps
Read the article
ASACLEAN for Extrusion: less downtime and scrap in sheet, pipe, film plants
ASACLEAN grade guide for Single and Twin Screw extruders, die changes, color changes and professional sheet and profile line purging
Read the article
Raise OEE and calculate ROI in injection: Operational Excellence guide with ASACLEAN
Measuring good purging impact on Overall Equipment Effectiveness (OEE), payback months and real Thai factory examples
Read the articleStarter basics
2 articlesWhat Purge and Rinse are: 2 hearts of screw purging with ASACLEAN
Start from how purging compound breaks through residue and rinses leftovers, for correct machine steps from the outset
Read the articleCarbon (Black Specks) in injection machines: causes, mechanism and ASACLEAN fixes
Speck and burn-buildup causes with mechanical-purging cuts for surface-quality jobs
Read the articleInjection Molding · Engineering Plastics
2 articlesControlled high-to-low resin change
Plan PX2, GL3 and RU overlaps without fixed temperature formulas, with Hot Runner and residence-time limits
Read the articleSafe changeover into POM and Nylon
Prep barrel, screw and flow path in verifiable order, with a grade table and release gates before counting good parts
Read the articlePreventive maintenance · Preventive Maintenance
1 articleExtrusion · Sheet, Pipe, Film
1 articleROI · Operational Excellence
2 articlesInjection loss-reduction guide
Resin Loss analysis from bag opening, color change and trial shots to cleaning, with charts and 5 actionable improvement steps
Read the articleRaise OEE and calculate ROI in injection: Operational Excellence guide with ASACLEAN
Measuring good purging impact on Overall Equipment Effectiveness (OEE), payback months and real Thai factory examples
Read the articleNeed advice for your specific machine?
CSC technicians advise grades and steps, with free samples to trial