Grade strengths
Friendlier-cost option than NewEX when terms pass
Use cases
Carbon residue and screw pull
ASACLEAN grade · high
YGASACLEAN purging compound
Value pick for carbon residue and screw-pull jobs
TDS dated Jul 2021 but metadata conflicts on year 2026; verify current issue
200–330°COperating temperature
Definition & positioning
What jobs fits YG
Value pick for carbon residue and screw-pull jobs. Use for carbon residue and screw pull — verify TDS limits before use
- Process
- Injection without Hot Runner; extrusion compounding/profile; screw pull
- Resin
- General-purpose resins and most engineering plastics
- Temperature
- 200–330°C
- Objectives
- Carbon residue and screw pull
- Hot Runner
- Must not be used with Hot Runner
- Glass Fiber / Additives
- Contains Glass Fiber
- Machine Sealing
- Sealing prohibited
- Residence / Clearance
- Remove screens; no machine residence at any temperature
Limits before use
TDS dated Jul 2021 but metadata conflicts on year 2026; verify current issue
Check on site: Temperature, resin type, Hot Runner, clearance, screen mesh and residence time
Basic operation
Basic usage
- Confirm YG resin and temperature
- Purge old resin and set the machine per TDS, observing: remove screens, and no machine residence at any temperature
- Feed purging compound; adjust back pressure and screw speed to machine state
- Chase purging compound out with next resin; verify cleanliness before production
Injection purging procedure · Extruder guide · Back Pressure and Screw Speed
Technical documents
The TDS is the authoritative document for temperature range, process and limits
Download TDS · dated July 2021; metadata conflictsSDS under review
YG FAQ
At what temperature does YG run
The confirmed range for YG is 200–330°C
Can YG run Hot Runner
Must not be used with Hot Runner
Can YG seal machines
Sealing prohibited
Related technical articles
Plan a controlled trial for YG
CSC technicians verify terms, set the baseline and define pass criteria
LINE