High-temp grade, no Glass Fiber, Hot Runner and shutdown and sealing support
Engineered for PPS, PEEK, PEI, LCP and super engineering plastics at 280–420°C
PF is a high-temp purging compound for super engineering plastics, delivering high cleaning power with no Glass Fiber, low residue and Hot Runner passage — the key option when PX2 does not fit the flow system
PF supports Hot Runner, has no Glass Fiber and allows sealing — fitting high-temp systems with fine flow paths per TDS clearance
TDS generally states 1–2 times system capacity; actual amount depends on residue level
Passage must be at least 0.5 mm, screens no finer than 100 mesh, and above 370°C never leave PF sitting in the barrel for any duration
Hot Runner present, Glass Fiber prohibited, low residue needed, or shutdown and sealing used
Extreme mechanical cleaning power needed, no Hot Runner, and the system accepts Glass Fiber
Verify the TDS before real use — especially the no-residence rule above 370°C
Yes; the TDS requires minimum 0.5 mm passage
The TDS states PF delivers high cleaning power with no Glass Fiber
PF supports Hot Runner and sealing with no Glass Fiber, while PX2 contains Glass Fiber and must not be used with Hot Runner or sealing
CSC technicians verify PEEK and PPS, Hot Runner and above-370°C limits
LINE