Safe use
Verify actual temperature, clearance and screen mesh before use. Screens must be no finer than 100 mesh, and purge out per TDS steps before starting the next resin production
ASACLEAN grade · PP low residue
ASACLEAN newUPLow-residue grade for PP
Low-residue grade for PP jobs, PE-compatible per terms
Helps color or material change in PP jobs with easy system purging-out. Fits jobs controlling residue, including transparent or unreinforced PP resins
170–300°COperating temperature
Technical fit
When to choose newUP
For PP jobs needing low residue, or as post-NewEX chaser in PP jobs per TDS and site terms
- Process
- Injection including Hot Runner; extrusion profile, sheet, blown film and compounding
- Resin
- PP-based resins; usable with PE
- Hot Runner
- Compatible with minimum 0.5 mm clearance
- Glass Fiber
- Glass-fiber-free
- Shutdown / Sealing
- Supported
- Residence Time
- Max 30 min residence above 280°C
newUP FAQ
Can newUP run Hot Runner
Yes, with minimum 0.5 mm passage, and the real system terms must be checked before use
Can newUP run PE
Yes per TDS data — but the primary pick should follow the job type: PE film and sheet may fit UF2 better, and PE blow molding may fit UB better
Plan a newUP trial on PP jobs
Send PP type, temperature, machine, Hot Runner and site problems for technician term checks
LINECompare PP options
Compare UP, newUP and CP by cleaning goal Verify terms before entering transparent PP jobs