Before stopping the machine
After Glass Fiber grades such as NewEX, YG or CG, chase that grade out first, then stop per documents and site SOP
ASACLEAN grade · shutdown & sealing
SLASACLEAN grade for shutdown and sealing
Dedicated grade for shutdown, controlling residue
Fits transparent, unreinforced resins or low-temp jobs, including chasing NewEX, YG or CG out before sealing per confirmed steps
150–300°COperating temperature
Technical fit
How SL differs from general grades
SL is built for shutdown and sealing, usable from 150°C — the pick when the system must be left clean before stopping
- Process
- Injection including Hot Runner; extrusion profile, sheet, blown film and compounding
- Resin
- General and engineering plastics within range, especially transparent, unreinforced and low-temp jobs
- Hot Runner
- Compatible, with no minimum clearance per TDS
- Glass Fiber
- Glass-fiber-free
- Shutdown / Sealing
- Dedicated grade for shutdown / sealing
- Residence Time
- Max 30 min residence above 280°C
No need to add a grade every time
General jobs can stay on the purging grade in use when it supports sealing. Consider SL only for transparent jobs, low temp, narrow passages, or mandatory Glass Fiber grade chase-out
SL FAQ
Can SL run Hot Runner
Yes, and the TDS sets no minimum clearance — still verify mold and real-system terms before use
Can SL replace routine purging grades
SL leads in sealing and low residue; routine picks should weigh resin, temperature and purging issues with technicians
Plan shutdown and sealing properly
Send resin, temperature, in-machine grade and stop duration for step checks
LINE